Elastic Properties in Tension and Shear of High Strength Nonferrous Metals and Stainless Steel - Effect of Previous Deformation and Heat Treatment

A resume is given of an investigation of the influence of plastic deformation and of annealing temperature on the tensile and shear elastic properties of high strength nonferrous metals and stainless steels in the form of rods and tubes. The data were obtained from earlier technical reports and notes, and from unpublished work in this investigation. There are also included data obtained from published and unpublished work performed on an independent investigation. The rod materials, namely, nickel, monel, inconel, copper, 13:2 Cr-Ni steel, and 18:8 Cr-Ni steel, were tested in tension; 18:8 Cr-Ni steel tubes were tested in shear, and nickel, monel, aluminum-monel, and Inconel tubes were tested in both tension and shear. There are first described experiments on the relationship between hysteresis and creep, as obtained with repeated cyclic stressing of annealed stainless steel specimens over a constant load range. These tests, which preceded the measurements of elastic properties, assisted in devising the loading time schedule used in such measurements. From corrected stress-set curves are derived the five proof stresses used as indices of elastic or yield strength. From corrected stress-strain curves are derived the secant modulus and its variation with stress. The relationship between the forms of the stress-set and stress-strain curves and the values of the properties derived is discussed. Curves of variation of proof stress and modulus with prior extension, as obtained with single rod specimens, consist in wavelike basic curves with superposed oscillations due to differences of rest interval and extension spacing; the effects of these differences are studied. Oscillations of proof stress and modulus are generally opposite in manner. The use of a series of tubular specimens corresponding to different amounts of prior extension of cold reduction gave curves almost devoid of oscillation since the effects of variation of rest interval and extension spacing were removed. Comparison is also obtained between the variation of the several properties, as measured in tension and in shear. The rise of proof stress with extension is studied, and the work-hardening rates of the various metals evaluated. The ratio between the tensile and shear proof stresses for the various annealed and cold-worked tubular metals is likewise calculated. The influence of annealing or tempering temperature on the proof stresses and moduli for the cold-worked metals and for air-hardened 13:2 Cr-Ni steel is investigated. An improvement of elastic strength generally is obtained, without important loss of yield strength, by annealing at suitable temperature. The variation of the proof stress and modulus of elasticity with plastic deformation or annealing temperature is explained in terms of the relative dominance of three important factors: namely, (a) internal stress, (b) lattice-expansion or work-hardening, and (c) crystal reorientation. Effective values of Poisson's ratio were computed from tensile and shear moduli obtained on tubular specimens. The variation of Poisson's ratio with plastic deformation and annealing temperature is explained in terms of the degree of anisotropy produced by changes of (a) internal stress and (b) crystal orientation

Bis(6-diphenylphosphino-acenaphth-5-yl)sulfoxide. A New Ligand for Late Transition Metal Complexes

The synthesis of the new ligand bis(6-diphenylphosphinoacenaphth-5-yl)sulfoxide, [6-(Ph2P)-5-Ace-6](2)-SO (1), is presented along with six transition metal complexes thereof, namely,1 center dot MCl (M = Rh, Cu, Ag, Au) and1 center dot MCl2(M = Ni, Pd). Within these novel complexes, close metal-sulfur distances are observed and the nature of the M-S coordination, as well as the response of the(+)S-O(-)bond, are investigated in detail with a set of spectroscopic, crystallographic and real-space bonding indicators

Mesopredator Release by an Emergent Superpredator: A Natural Experiment of Predation in a Three Level Guild

Chakarov N, Krüger O. Mesopredator Release by an Emergent Superpredator: A Natural Experiment of Predation in a Three Level Guild. PLoS ONE. 2010;5(12): e15229.Background: Intraguild predation (IGP) is widespread but it is often neglected that guilds commonly include many layers of dominance within. This could obscure the effects of IGP making unclear whether the intermediate or the bottom mesopredator will bear higher costs from the emergence of a new top predator. Methodology/Principal Findings: In one of the most extensive datasets of avian IGP, we analyse the impact of recolonization of a superpredator, the eagle owl Bubo bubo on breeding success, territorial dynamics and population densities of two mesopredators, the northern goshawk Accipiter gentilis and its IG prey, the common buzzard Buteo buteo. The data covers more than two decades and encompass three adjacent plots. Eagle owls only recolonized the central plot during the second decade, thereby providing a natural experiment. Both species showed a decrease in standardized reproductive success and an increase in brood failure within 1.5 km of the superpredator. During the second decade, territory dynamics of goshawks was significantly higher in the central plot compared to both other plots. No such pattern existed in buzzards. Goshawk density in the second decade decreased in the central plot, while it increased in both other plots. Buzzard density in the second decade rapidly increased in the north, remained unchanged in the south and increased moderately in the center in a probable case of mesopredator release. Conclusions/Significance: Our study finds support for top-down control on the intermediate mesopredator and both top-down and bottom-up control of the bottom mesopredator. In the face of considerable costs of IGP, both species probably compete to breed in predator-free refugia, which get mostly occupied by the dominant raptor. Therefore for mesopredators the outcome of IGP might depend directly on the number of dominance levels which supersede them

Horse immunization with short-chain consensus α-neurotoxin generates antibodies against broad spectrum of elapid venomous species

Antivenoms are fundamental in the therapy for snakebites. In elapid venoms, there are toxins, e.g. short-chain α-neurotoxins, which are quite abundant, highly toxic, and consequently play a major role in envenomation processes. The core problem is that such α-neurotoxins are weakly immunogenic, and many current elapid antivenoms show low reactivity towards them. We have previously developed a recombinant consensus short-chain α-neurotoxin (ScNtx) based on sequences from the most lethal elapid venoms from America, Africa, Asia, and Oceania. Here we report that an antivenom generated by immunizing horses with ScNtx can successfully neutralize the lethality of pure recombinant and native short-chain α-neurotoxins, as well as whole neurotoxic elapid venoms from diverse genera such as Micrurus, Dendroaspis, Naja, Walterinnesia, Ophiophagus and Hydrophis. These results provide a proof-ofprinciple for using recombinant proteins with rationally designed consensus sequences as universal immunogens for developing next-generation antivenoms with higher effectiveness and broader neutralizing capacity.Universidad de Costa Rica/[741-B7-608]/UCR/Costa RicaDireccion General de Asuntos del Personal Academico/[IN203118]/DGAPA/MéxicoDireccion General de Asuntos del Personal Academico/[IN207218]/DGAPA/MéxicoUCR::Vicerrectoría de Investigación::Unidades de Investigación::Ciencias de la Salud::Instituto Clodomiro Picado (ICP

NACA Technical Notes

Note presenting an effective value of Poisson's ratio for 18:8 Cr-Ni steel computed from values of tensile and torsional moduli of elasticity obtianed in earlier investigations by use of an appropriate formula

NACA Technical Notes

Note presenting a study of the shear elastic properties of monel, nickel, Inconel, and aluminum-model tubing, as influenced by extension of annealed specimens, by cold reduction during manufacture, and by stress-relief annealing of cold-reduced materials. With slight extension of annealed tubing, the shear proof stresses generally decrease, owing to induced internal stress